Welcome to The EEcosystem Podcast, a podcast for Electrical Engineers who design and develop advanced technology applications. Each week we feature conversations with experts and subject matter experts that will help you navigate your design across all disciplines and stakeholders through a systems-based perspective. Subjects discussed are packaging, components, supply chain, materials, PCB design, fab, assembly, SI/PI/EMI, RF/MW/mmWave, embedded systems, test and measurement, and more. For ...
…
continue reading
![Artwork](/static/images/128pixel.png)
1
Innovation and Trends in ADC Sensor Technology
20:10
20:10
Toista myöhemmin
Toista myöhemmin
Listat
Tykkää
Tykätty
20:10
The explosion of automotive and industrial sensors is driving the demand for new cutting-edge ADC sensor technology. This week Kyle Stone of Texas Instruments discusses how this proliferation of sensor technologies has driven TI to innovate and create both on-chip and discrete ADC sensor solutions and what's available for engineers to meet these gr…
…
continue reading
![Artwork](/static/images/128pixel.png)
1
How to Navigate the Complexities of 3D RF Module Design (SiP)
32:22
32:22
Toista myöhemmin
Toista myöhemmin
Listat
Tykkää
Tykätty
32:22
Keysight RF subject matter expert and YouTuber, Anurag Bhargava, discusses 3D RF module design and the challenges engineers face in integrating dissimilar technologies into a small form factor. He emphasizes the need for an open and interoperable ecosystem of design tools to address these challenges. Bhargava also highlights the importance of simul…
…
continue reading
![Artwork](/static/images/128pixel.png)
1
Is Your Component Data Intelligence Really Intelligent?
43:20
43:20
Toista myöhemmin
Toista myöhemmin
Listat
Tykkää
Tykätty
43:20
In this episode, Matthew Haber CEO of Cofactr, discusses how he and his co-founder Phillip Gulley have launched AI-powered solutions that connect real-time data and materials intelligence that can flow seamlessly between engineers, buyers, distributors, and contract manufacturers to streamline the entire process and ensure supply chain resilience. …
…
continue reading
![Artwork](/static/images/128pixel.png)
1
Mastering Stability and Reliability of RF/MW Cable Technologies
24:58
24:58
Toista myöhemmin
Toista myöhemmin
Listat
Tykkää
Tykätty
24:58
In this week's episode, RF/Microwave Cable technology veterans, Dan Birch and Ron Souders discuss the challenges of maintaining the stability and reliability of these crucial interconnects. They unpack which applications drive tighter performance specs, increasing channel complexities, and why stability is a critical concern for design & developmen…
…
continue reading
![Artwork](/static/images/128pixel.png)
1
Chiplets: The Future of Semiconductor Design with Steven Slater
16:03
16:03
Toista myöhemmin
Toista myöhemmin
Listat
Tykkää
Tykätty
16:03
Welcome to this week's ecosystem podcast with Judy Warner! In this episode, we dive deep into the world of chiplets with Steven Slater, the Director of Product Management at Keysight. Discover the exciting advancements and opportunities in chiplet technology and how it’s shaping the future of the semiconductor industry. We explore the progress of t…
…
continue reading
![Artwork](/static/images/128pixel.png)
1
Engineering Salary and Career Insights: How Much Should you be Making?
23:05
23:05
Toista myöhemmin
Toista myöhemmin
Listat
Tykkää
Tykätty
23:05
In this episode, we delve into Electronic Design Magazine's yearly career and salary survey with Michelle Kopier, Group Associate Publisher. Learn about their online tool, utilizing data from 2000+ engineers, to determine salary based on education, experience, and US state of residence. Unravel strategies for maximizing earning potential for your e…
…
continue reading
![Artwork](/static/images/128pixel.png)
1
Effectively designing a Power Delivery System with Expert Lee Ritchey
21:46
21:46
Toista myöhemmin
Toista myöhemmin
Listat
Tykkää
Tykätty
21:46
In this episode of the EEcosystem Podcast, high-speed expert, Lee Ritchey, unravels the complexities and nuances of power delivery systems in circuit design. Hosted by Judy Warner, the conversation examines top-to-bottom aspects of power supply, from the foundational definition to the roles of DC converters and onboard capacitors. When it comes to …
…
continue reading
![Artwork](/static/images/128pixel.png)
1
A Pre-game Coverage of Samtec at DesignCon and The New Era of High-Speed Connectivity
27:50
27:50
Toista myöhemmin
Toista myöhemmin
Listat
Tykkää
Tykätty
27:50
Join us in this episode of our DesignCon pregame series as Judy Warner sits down with Matt Burns and Scott McMorrow from Samtec. As industry pioneers in connectivity, they discuss the approaching DesignCon, unveil groundbreaking technology, and share innovative leaps set to captivate. Scott provides captivating insights on their recent integrations…
…
continue reading
![Artwork](/static/images/128pixel.png)
1
DesignCon 2024: Behind the Scenes Sneak Peek
17:26
17:26
Toista myöhemmin
Toista myöhemmin
Listat
Tykkää
Tykätty
17:26
This episode features special guest Suzanne Deffree, Group Event Director for DesignCon 2024. Get a look behind the scenes of this premier high-speed communication and systems design conference. Often referred to as the 'Super Bowl of Electronics' Suzanne offers an insider's perspective on what makes it a must-attend industry event. Discover the ex…
…
continue reading
![Artwork](/static/images/128pixel.png)
1
Expert Memory Design and Implementation
23:20
23:20
Toista myöhemmin
Toista myöhemmin
Listat
Tykkää
Tykätty
23:20
In this episode, Hermann Ruckerbauer discusses the challenges and sticking points in memory design. He highlights the importance of not blindly following design guides and reference designs, as they may not be suitable for specific design constraints. Hermann also emphasizes the need for thorough verification and testing of memory interfaces, inclu…
…
continue reading
![Artwork](/static/images/128pixel.png)
1
Product Design Process | Navigating the Electronics Engineer’s Journey with Ben Dannan & Heesoo Lee
32:20
32:20
Toista myöhemmin
Toista myöhemmin
Listat
Tykkää
Tykätty
32:20
From concept to creation, this video is your guide to mastering the product design process. Don't miss out on the wisdom shared by these experts! Join us on a journey through the intricacies of product design with electronics engineers Ben Dannan and Heesoo Lee. Discover the roadmap, uncover key insights, and gain practical tips as they navigate th…
…
continue reading
![Artwork](/static/images/128pixel.png)
1
VNA: Insights into Time & Frequency Domains | Jason Ellison (Rohde & Schwarz)
33:55
33:55
Toista myöhemmin
Toista myöhemmin
Listat
Tykkää
Tykätty
33:55
🚀 Explore the high-speed digital frontier in our latest video, "Decoding VNAs and Standards Compliance." Unveil the crucial role of Vector Network Analyzers (VNAs) in meeting IEEE, PCIe, and USB standards. 🌐 Discover how VNAs provide dual insights into frequency and time domain signals, giving engineers a comprehensive view. 🔍 Get a sneak peek into…
…
continue reading
![Artwork](/static/images/128pixel.png)
1
The Father of IBIS Shares his SI Cheat Sheet
33:21
33:21
Toista myöhemmin
Toista myöhemmin
Listat
Tykkää
Tykätty
33:21
Signal Integrity Expert and founder of SI Guys, Don Telian, is our guest in this episode. We discuss his illustrious career which includes his time at Intel, where he became The Father of IBIS. Don has made a very popular SI Cheat Sheet for hardware engineers. He shares some practical guidelines from this cheat sheet and other principles he's artic…
…
continue reading
![Artwork](/static/images/128pixel.png)
1
”Chips Don’t Float!” Updates on Strengthening the US PCB Supply Chain
16:47
16:47
Toista myöhemmin
Toista myöhemmin
Listat
Tykkää
Tykätty
16:47
After the worldwide chip shortages during the pandemic, the US government has been investing in re-shoring chip foundries around the country. However, as PCBAA says "Chips Don't Float!" In this episode, David Schild, Executive Director of PCBAA shares exciting updates on presidential and congressional support for securing the PCB fabrication and ma…
…
continue reading
![Artwork](/static/images/128pixel.png)
1
Accurate 3D EM Analysis With a Click of Button | Know How ? Expert - Yuriy Shlepnev (Simberian Inc.)
39:36
39:36
Toista myöhemmin
Toista myöhemmin
Listat
Tykkää
Tykätty
39:36
Accurate 3D EM Analysis With a Click of Button | Know How ? Expert - Yuriy Shlepnev (Simberian Inc.) 02:00 Intro: Yuriy’s background and brief overview of Simberian and Simbeor 04:30 What is Simbeor? What problems does it solve? Who is it for? 12:00 What is new in the latest release? 14:50 What kind of feedback have you received on the latest relea…
…
continue reading
![Artwork](/static/images/128pixel.png)
1
Circuit Architecture to Schmatic in 60 Seconds
35:08
35:08
Toista myöhemmin
Toista myöhemmin
Listat
Tykkää
Tykätty
35:08
🔌 Welcome to our latest video featuring an in-depth conversation with Tomide Adesanmi, the co-founder of Circuit Mind! Join us as we dive into the world of circuit design and the groundbreaking solutions that Circuit Mind is bringing to the table. 🛠️ In this interview, we'll explore the challenges that circuit designers face, including the problem …
…
continue reading
![Artwork](/static/images/128pixel.png)
1
PCB Design for Manufacturing (DFM) & Handoff Mistakes to Avoid | Laura Martin, PCB DfM Expert
18:16
18:16
Toista myöhemmin
Toista myöhemmin
Listat
Tykkää
Tykätty
18:16
In this episode, EE and former Lockheed Martin PCB expert join us to discuss why the hand-off between design engineers and their fabricators has become so challenging and problematic. She explains how, in her new role at Summit Interconnect, she is developing a team and a program dedicated to helping support, educate, and empower engineers. She als…
…
continue reading
![Artwork](/static/images/128pixel.png)
1
Satellites, 5G, Open RAN, PCI6, Chat GPT and Beyond: Samtec’s Expert on High-Speed Tech! - Matt Burns
33:15
33:15
Toista myöhemmin
Toista myöhemmin
Listat
Tykkää
Tykätty
33:15
Samtec's Global Head of Technical Marketing, Matt Burns, joins us to discuss the rapidly emerging new era of high-speed technology. He covers what's happening in 224Gps, AI, satellites, 5G, Open RAN, PCI6, and much more. He shares his observations of how Samtec is "integrating to innovate" with partners from all aspects of the ecosystem. He also di…
…
continue reading
![Artwork](/static/images/128pixel.png)
1
Ben Dannan: What is enough VDDQ Package PI Analysis for DDR4/5
15:38
15:38
Toista myöhemmin
Toista myöhemmin
Listat
Tykkää
Tykätty
15:38
Ben Dannan of Signal Edge Solutions and Principal Engineer at a Tier One Defense Contractor discusses a presentation he'll be giving at EDI Con Online next week. His talk is entitled: What is Enough VDDQ Package PI Analysis for DDR4/5. His talk will cover an actual use case he and his colleague encountered and will share techniques on how to "sanit…
…
continue reading
![Artwork](/static/images/128pixel.png)
1
Signal Integrity | Impedence Modeling | AI in EDA Tools | Expert - Bert Simonowich
27:09
27:09
Toista myöhemmin
Toista myöhemmin
Listat
Tykkää
Tykätty
27:09
Bert Simonovich shares insights related to hidden factors he's discovered in regard to inaccurate impedance models. He's discovered hidden effects that are a result of anisotropic effects in copper-clad laminates, that can result in signal integrity problems. Bert will be giving two upcoming presentations including EDI COM which takes place next we…
…
continue reading
![Artwork](/static/images/128pixel.png)
1
EMI and EMC Testing | Simulation | Standards | Expert Insights - Juliano Mologni
28:49
28:49
Toista myöhemmin
Toista myöhemmin
Listat
Tykkää
Tykätty
28:49
Passing EMC can be extremely challenging and expensive. Particularly when you fail and have to go through a mystifying debug that feels like a game of whack-a-mole. Juliano Mologni, EMI/EMC expert and product manager at Ansys, discusses things engineers should consider and how simulation will help you go into that "Chamber of Secrets" confident and…
…
continue reading
![Artwork](/static/images/128pixel.png)
1
EDI CON 2023: Conference Preview
13:34
13:34
Toista myöhemmin
Toista myöhemmin
Listat
Tykkää
Tykätty
13:34
The Electronic Design Innovation Conference, or EDI CON will be held every Wednesday in October. It's free, it's fully online and is full of excellent technical sessions for engineers. Pat Hindle, Media Director at Signal Integrity Journal joins me this week to share a sneak peek on the Four technical tracks, the sessions, speakers and all you can …
…
continue reading
![Artwork](/static/images/128pixel.png)
1
Power Integrity Everywhere: From Space to TikTok
27:29
27:29
Toista myöhemmin
Toista myöhemmin
Listat
Tykkää
Tykätty
27:29
In this video, we will discuss the basics of power integrity in applications ranging from Space to TikTok. We will cover the following topics: The need for power integrity is universal in today's electronic applications. Leading experts Steve Sandler and Heidi Barnes share their insights from space and data center applications to PCB design and how…
…
continue reading
![Artwork](/static/images/128pixel.png)
1
The Signal Integrity Workflow Evolution
40:08
40:08
Toista myöhemmin
Toista myöhemmin
Listat
Tykkää
Tykätty
40:08
Keysight Learning and The EEcosystem Podcast present Professor Dr. Eric Bogatin, Signal Integrity Expert, and Dr. Tim Wang-Lee, Signal Integrity Application Scientist in the first of a special edition podcast series. In this episode, we discuss issues related to the signal integrity design workflow and ways to ensure efficiency and success. We also…
…
continue reading
![Artwork](/static/images/128pixel.png)
1
Next-Gen Software-Defined PCB Design for Hardware Designers
37:14
37:14
Toista myöhemmin
Toista myöhemmin
Listat
Tykkää
Tykätty
37:14
Duncan Haldane, CEO and Co-Founder of Silicon Valley startup, JITX discusses his vision for increasing success and productivity for hardware engineers through automated software-defined PCB Design. Early release successes are promising indicators that JITX is positioned to usher in a new and exciting era for design engineers. 🤓Join the EEcosystem E…
…
continue reading
![Artwork](/static/images/128pixel.png)
1
PCB Industry Visits Capitol Hill and the Impact to Engineers
21:57
21:57
Toista myöhemmin
Toista myöhemmin
Listat
Tykkää
Tykätty
21:57
Wonder if you had the ability to have your PCBs manufactured in the US that were abundant, reliable and the pricing was competitive with offshore suppliers? This is what my guest, David Schild of PCBAA was recently advocating for on Capitol Hill along with PCB Industry executive members. Learn about the significant gains made in this annual event a…
…
continue reading
![Artwork](/static/images/128pixel.png)
1
Understanding and Mitigating Board Level Skew
32:34
32:34
Toista myöhemmin
Toista myöhemmin
Listat
Tykkää
Tykätty
32:34
High-Speed Technical expert and luminary, Lee Ritchey is our guest today to discuss what engineers need to know to understand differential pair signal skew caused by the PCB fiber weave effect. Ritchey will discuss things you need to know in order to master and mitigate them in your designs. We also talk about things the industry is doing to solve …
…
continue reading
Siglent's Chris Armstrong gives updates on Siglent's latest products, particularly their latest VNAs and handheld portable scope that makes higher performance test and measurement equipment available at a competitive price point. Siglent WebsiteKirjoittanut Judy Warner
…
continue reading
Higher Frequency interconnects are driving Samtec to continually develop high-frequency products with smaller footprints. Jim talks about what they are highlighting at this year's International Microwave Symposium. Samtec IMS Landing Page https://blog.samtec.com/post/ims-2023... Samtec Homepage https://www.samtec.com/…
…
continue reading
Daren McClearnon talks about the latest release of ADS 2024 and the evolving complexity of design processes RF/MW/mmWave of chip and module design. The overall trend is in more functionality in smaller spaces with less power and how Keysight is working to help designers meet these challenges. Keysight Pathwave ADS Announcement https://www.keysight.…
…
continue reading
![Artwork](/static/images/128pixel.png)
1
Onsite Insights IMS 2023: John Coonrod, Rogers Corporation
11:07
11:07
Toista myöhemmin
Toista myöhemmin
Listat
Tykkää
Tykätty
11:07
John Coonrod, Technical Marketing Manager at Rogers Corporation, is our guest in this bonus IMS series. He talks about the challenge of designing for mmWave. He also talks about Radix, a new 3D printable RF material, and what he and Rogers are focusing on at this year's IMS 2023. Rogers Corporation Advanced Electronics Solutions Technology Support …
…
continue reading
Laura Martin, Industrial Engineer and Director of Application Engineering for Summit Interconnect talks about her unlikely path to becoming a subject matter expert in PCB Technology and how we might inspire more women to follow her lead into the technology sector.Kirjoittanut Judy Warner
…
continue reading
![Artwork](/static/images/128pixel.png)
1
Pushing the Limits of High Frequency Interconnect Technology
31:26
31:26
Toista myöhemmin
Toista myöhemmin
Listat
Tykkää
Tykätty
31:26
As Frequencies increase in today's demanding applications, the challenges and complexity of effectively managing interconnects grow exponentially. Samtec's David Beraun and Steve McGeary join in this episode to talk about what Samtec is doing to help engineers to push the limits. They also talk about new products they will be introducing and highli…
…
continue reading
![Artwork](/static/images/128pixel.png)
1
What to Expect at the International Microwave Symposium (IMS) 2023
28:39
28:39
Toista myöhemmin
Toista myöhemmin
Listat
Tykkää
Tykätty
28:39
John Wood and Gayle Collins are the General Co-Chairs of this year's IMS 2023 which will be held in San Diego June11-16, 2023. They join us to talk about all the robust technical content that will be presented at this year's show along with social gatherings and over 90,000 square feet of exhibitor space full of companies from all across the globe.…
…
continue reading
![Artwork](/static/images/128pixel.png)
1
How Your PCB Manufacturer Can Drive Your Success
37:05
37:05
Toista myöhemmin
Toista myöhemmin
Listat
Tykkää
Tykätty
37:05
Sean Patterson, COO of Summit Technologies joins us for this episode focusing on PCB technology. As an engineer who has spent a couple of decades focused on technology and PCB Manufacturing operations, he shares what engineers can do to help drive both design and career success. He also shares his insights on the state of PCB fabrication in the Uni…
…
continue reading
![Artwork](/static/images/128pixel.png)
1
Signal Integrity 101: Fundmentals for Professional Engineers
36:44
36:44
Toista myöhemmin
Toista myöhemmin
Listat
Tykkää
Tykätty
36:44
Increasingly, a wide variety of electronic design applications face signal integrity issues. Therefore, engineers need to understand the fundamental principles of SI--not only techniques. SI expert, Scott McMorrow, and HS technical marketing expert, Matt Burns join us this week to talk about the state of SI know-how across the industry and why Samt…
…
continue reading
![Artwork](/static/images/128pixel.png)
1
How to Become a Full-Stack Hardware Engineer
56:59
56:59
Toista myöhemmin
Toista myöhemmin
Listat
Tykkää
Tykätty
56:59
Eli Hughes is Entrepreneur, Principal Engineer, Consultant, and Content creator for NXP semiconductors. Hughes has decades of experience in acoustics, hardware design, embedded, PCB design, and much more. In this conversation, we talk about how he developed both the philosophy and skills that have led to his successful, diverse and interesting engi…
…
continue reading
![Artwork](/static/images/128pixel.png)
1
Dr. Alex Lidow: The Mind Behind the Power MOSFET and the rise of eGaN©
48:42
48:42
Toista myöhemmin
Toista myöhemmin
Listat
Tykkää
Tykätty
48:42
In this episode of The EEcosystem Podcast, our guest is Dr. Alex Lidow, CEO and co-founder of Efficient Power Conversion and the co-inventor of the HEXFET, power MOSFET, and eGaN. Lidow holds degrees from Caltech and Stanford. He earned a Ph.D. in applied physics from Stanford University in 1977 as a Hertz Foundation Fellow. In this episode, we wil…
…
continue reading
![Artwork](/static/images/128pixel.png)
1
Systems Engineering with an Aviators ”Mission” Mindset (Pt 1)
27:21
27:21
Toista myöhemmin
Toista myöhemmin
Listat
Tykkää
Tykätty
27:21
Military Prime Technical Fellow and Air Force Pilot, Ben Dannan, discusses his unique perspective on engineering. Both his time in the air and his time on the bench have worked together to make him a more effective systems engineer. (This is part 1 of a 3-part series) 2:30 Ben’s current role and work at NGC, and his career path that included his fo…
…
continue reading
![Artwork](/static/images/128pixel.png)
1
Cracking the EMC Code: Troubleshooting Tips from the Workbench
27:20
27:20
Toista myöhemmin
Toista myöhemmin
Listat
Tykkää
Tykätty
27:20
Ken Wyatt discusses EMC tips and tricks he's developed over decades to help engineers diagnose and troubleshoot EMC issues right from their workbench. He's published his knowledge in a popular book trilogy we talk about in this episode. Links from the Show Amazon Author’s Page: Web Site: http://www.emc-seminars.com/index.html LinkedIn Profile: Free…
…
continue reading
![Artwork](/static/images/128pixel.png)
1
Hardware and Signal Integrity Efficient Design Flow
21:28
21:28
Toista myöhemmin
Toista myöhemmin
Listat
Tykkää
Tykätty
21:28
Dr. Tim Wang-Lee, SI/PI Applications Scientist of Keysight shares the challenges that exist between hardware and SI Engineers. We discuss industry trends and how EDA companies, including Keysight, are creating software solutions that enable engineers to collaborate seamlessly and create "virtual" prototypes that dramatically improve workflow and re…
…
continue reading
![Artwork](/static/images/128pixel.png)
1
Navigating the Pitfalls of RF/MW and mmWave PCB Design, Fab and Assembly
17:43
17:43
Toista myöhemmin
Toista myöhemmin
Listat
Tykkää
Tykätty
17:43
Chris Savalia and Madhur Chawla join us to discuss how to successfully navigate the various unique challenges of RF/MW and mmWave PCB Design, Fab, and Assembly. Visit Transline Technology https://translinetech.com Subscribe to The EEcosystem for technical content and to connect with fellow engineers and the guests from our shows. https://theeecosys…
…
continue reading
![Artwork](/static/images/128pixel.png)
1
Lee Ritchey & Avishtech Founders on Simulation-Based Design Stack Up
15:02
15:02
Toista myöhemmin
Toista myöhemmin
Listat
Tykkää
Tykätty
15:02
High-Speed Design Expert Lee Ritchey is joined by Avishtech executives Tarun and Keshav Amla to discuss the need for stack-up simulation that goes far beyond basic impedance measurement. They explain how engineers can dramatically cut down on multiple board spins and get products to market in a fraction of the time through the breakthrough stack-up…
…
continue reading
Technical Fellow, Ben Dannan discusses the impact and value of DesignCon on his thriving career. He discusses his first DesignCon, the role of highly skilled mentors, and how writing, publishing, and presenting have accelerated his skill and taken his career heights. Ben has also started his own consultancy Signal Edge Solutions helping others with…
…
continue reading
![Artwork](/static/images/128pixel.png)
1
Advancements in Memory, Virtual Simulation, and Enabling Design for Context from Keysight
13:19
13:19
Toista myöhemmin
Toista myöhemmin
Listat
Tykkää
Tykätty
13:19
Niels Fache, VP of Keysight EDA, and Stephen Slater, Product Manager of Keysight discuss the advancement in DDR5 and beyond from the DesignCon exhibit floor. They also talk about the "democratization" of SI/PI/EMI simulation, "virtual" simulation, and enabling engineers to Design for Context. Keysight Pathwave Solutions Website New EP-Scan Software…
…
continue reading
![Artwork](/static/images/128pixel.png)
1
Boston Dynamics Keynote Inspires with Insight, Passion, and His Robot Dog ”Spot” at DesignCon 2023
17:45
17:45
Toista myöhemmin
Toista myöhemmin
Listat
Tykkää
Tykätty
17:45
Devin Billings, Associate Director of Electrical Engineering Research and Development from Boston Dynamics discusses the complexities and challenges of realizing the world's most complex and lifelike Robots. Billings also discusses the challenges ahead and encourages other passionate and driven electrical engineers to consider pursuing a career in …
…
continue reading
![Artwork](/static/images/128pixel.png)
1
How to Pass EMC the First Time, Every Time
37:10
37:10
Toista myöhemmin
Toista myöhemmin
Listat
Tykkää
Tykätty
37:10
Dan Beeker, Technical Director at NXP, joins the podcast today to discuss how you can learn how to pass EMC with confidence every time. By applying simple principles that he'll be discussing in his sessions at DesignCon, he is able to help tier-one automotive OEM engineering teams avoid countless re-spins and failed attempts at EM compliance. Dan B…
…
continue reading
![Artwork](/static/images/128pixel.png)
1
Game-Changing Modeling and Simulation for your PCB Stack-Up
48:23
48:23
Toista myöhemmin
Toista myöhemmin
Listat
Tykkää
Tykätty
48:23
Game-Changing Modeling and Simulation for your PCB Stack-Up Sponsor Resource Links: DesignCon 2023 is coming soon! Register today. EEcosystem Listeners get 20% off the conference pass by using the promo code JUDY. Visit The EEcosystem Website For a Free Download to: Samtec's white paper: Wideband launches: Much more than Footprints on PCBs. For SI/…
…
continue reading
![Artwork](/static/images/128pixel.png)
1
Paving the Road to 224G: Preview of Samtec’s Enabling Technologies for DesignCon
40:28
40:28
Toista myöhemmin
Toista myöhemmin
Listat
Tykkää
Tykätty
40:28
Matt Burns, Technical Marketing Manager of Samtec, joins in this episode to discuss the strides they're making with 112G applications and adoption. He also discusses the trajectory and outlook for 224G. Matt also shares a sneak peek of some of the enabling high-speed interconnect solutions Samtec will be revealing at the show. Samtec DesignCon Land…
…
continue reading
![Artwork](/static/images/128pixel.png)
1
VRM Modeling & Simulations for Power Integrity that are Accurate, Simple to do and Blazingly Fast!
41:50
41:50
Toista myöhemmin
Toista myöhemmin
Listat
Tykkää
Tykätty
41:50
In this episode, Steve Sandler of Pictotest, Heidi Barnes of Keysight, and Ben Dannan Technical Fellow and founder of Signal Edge Solutions discuss their upcoming presentation at DesignCon that offers a way to model and simulate VRM effectively that is accurate, easy to do, and blazingly fast! VRM Modeling & Stability Analysis for Power Integrity E…
…
continue reading