CNCRT63: CNC For Beginners with Mark Lindsay

CNC Router Tips Podcast

CNC FOR BEGINNERS WITH MARK LINDSAY
CNC Router Tips Podcast Episode 63
CNCRT63: CNC For Beginners With Mark Lindsay
I think you will enjoy this episode of the CNC Router Tips Podcast because you get to meet Mark Linsay of Mark Lindsay CNC. Mark Lindsay built his first CNC router using plans from Dave Gatton. Since then Mark has grown from a man needing help to a man giving help to the CNC community. His CNC tutorials on his Youtube channel have helped many CNC beginners to get squared away.
Mark Lindsey is the administrator of the CNC For The Beginner group on Facebook where nearly 9000 members meet and share information about CNC routers, milling machines and laser cutters. Members share information, files and opinions with each other.
Mark's interest in CNC router started when he wanted to build a Cigar Box guitar using a CNC router. Mark dived in and began researching how to build a CNC Router Table.
Bill Griggs contact info:
Twitter: @BillGriggs
Website: http://www.cncroutertips.com
SHOW NOTES: http://www.cncroutertips.com/63
WEBSITES MENTIONED
Disclosure: Please note that some of the links below are affiliate links, and at no additional cost to you, I will earn a commission if you decide to make a purchase. Please understand that I have experience with all of these companies, books, tools and I recommend them because they are helpful and useful, not because of the small commissions I make if you decide to buy something. Please do not spend any money on these products unless you feel you need them or that they will help you achieve your goals.
Mark Lindsay CNC https://marklindsaycnc.com
Dave Gatton http://www.davegatton.com
SmartScreens https://ngeneyes.com/smartscreen/licensing/
SmartScreens For Mach3 Triple Edge Finder https://www.youtube.com/watch?v=FUlXikOPHbw
Mach3 Software http://www.themakersguide.com/home/products/mach3
The Makers Guide http://themakersguide.com
#CNC Router Tips https://www.facebook.com/groups/cncroutertips/
Mach3 Software http://www.themakersguide.com/home/products/mach3
CNC Starter Bit set http://cncroutertips.com/bits
VCarve Demo Video http://cncroutertips.com/demo
VCarve Software http://themakersguide.com/vcarve8
Triple Edge Finder http://themakersguide.com
Maker Masters http://makermasters.com
Resources http://cncroutertips.com/resources
Youtube http://youtube.com
Leaving a rating and Review in iTunes makes it easier for people to find this information. Please help us spread this info as widely as possible.
Go to this page. https://itunes.apple.com/us/podcast/cnc-router-tips-podcast-spreaker/id1031116372?mt=2
Click "View in iTunes"
Next Click on ratings and reviews in iTunes
Click the "Write a Review" button
Leave an honest rating and write a review.