))
Episode 003 - Roland Juno 6/60
Fetch error
Hmmm there seems to be a problem fetching this series right now.
Last successful fetch was on February 26, 2024 20:48 (
What now? This series will be checked again in the next day. If you believe it should be working, please verify the publisher's feed link below is valid and includes actual episode links. You can contact support to request the feed be immediately fetched.
Manage episode 353104410 series 3439613
Sisällön tarjoaa Adam Anderson. Adam Anderson tai sen podcast-alustan kumppani lataa ja toimittaa kaiken podcast-sisällön, mukaan lukien jaksot, grafiikat ja podcast-kuvaukset. Jos uskot jonkun käyttävän tekijänoikeudella suojattua teostasi ilman lupaasi, voit seurata tässä https://fi.player.fm/legal kuvattua prosessia.
Overview
The Roland Juno 6 and Juno 60 are 6-voice analog polyphonic synthesizers. While limited in functionality by today’s standards, these classics present an extremely accessible interface to synthesis newcomers; and they sound fantastic. Both lack MIDI, the Juno 6 lacks patch storage. All this means you won’t be wasting your time with complicated configurations. Just start playing.
Resources
- TAL-U-NO-LX Software emulation of the Juno 6/60
- Juno 6 Owner’s Manual
- Juno 60 Owner’s Manual
- Juno 60 MIDI retrofit
- Another Juno 6/60 MIDI retrofit
- And one more MIDI retrofit
Inspiration
In the video below, Nick Rhodes uses a Roland Jupiter 8 (I know, not the same thing) in “Save A Prayer”. Notice the use of the bender. The Juno 6/60 have the same bender. Set the bender to control the DCO at about 33% and see if you can mimic the technique. (Skip to 4:30)
Tip
And, in case you missed it in the podcast, here’s the tip for integrating a Juno 6/60 into a MIDI setup. Use either a MIDI-controlled drum machine or your DAW (Digital Audio Workstation) to send a click track (or use the rimshot output) to the Juno’s arpeggiator control input. The arpeggiator will now be synced up to the controlling device’s clock.
18 jaksoa
Jaa
